KOYO RAXZ 550 complex bearings

Designation of open end cover:SCO213-65; s1:32.55 mm; L3:121 mm; T max.:200 °C; L1:137 mm; A1:26 mm; B:65.1 mm; SW:6 mm; G:M6x1; Designation of bearing:UC213G2T20;

Bearing Series:206 Series; Grease Type:Unirex N2; Flinger Material:Steel; Housing Coating:No Coating; Bearing Family:Setscrew Ball Bearin; d:1.2500 in; UPC:782476245955; Retainer Type:Std Retainer; Seal Type:Single Lip; Max Bearing Speed:5250 rpm;

Flinger Material:Steel; Retainer Type:Max Life Cage; Housing Type:2 Bolt Pillow Block; Self Aligning:Yes; Ring Size:Standard; Bearing Series:212 Series; Bearing Bore Shape:Round; Ball Grade:Class 10; Max Bearing Speed:2750 rpm; d:55.0000 in;

Min operating temperature, Tmin:-20 °C; Nlim (oil):17,000 rpm; Characteristic cage frequency, FTF:0.44 Hz; Lubrication hole on outer ring:Non/No; Lw:7.3 mm; Brand:NTN; Weight / Kilogram:0.01; Manufacturer Name:NTN; Characteristic rolling element frequency, BSF:7.88 Hz; Category:Roller Bearings;

Characteristic cage frequency, FTF:0.45 Hz; ra max:0.3 mm; B:7 mm; f0:16.5; D:42 mm; Radial clearance class:CN; Da max:40 mm; Characteristic inner ring frequency, BPFI:9.88 Hz; Min operating temperature, Tmin:-20 °C; Dynamic load, C:4.7 kN;

A3:2.5 mm; Weight:1.03 kg; s1:33.35 mm; G:M6x1; A5:18.2 mm; A:26 mm; T max.:100 °C; C:22.36 kN; Designation of bearing:EX305-14G2L3; C0:11.5 kN;

L:137 mm; Designation of housing:F209N-; Weight:2.17 kg; B1:43.7 mm; Designation of open end cover:SCOE209-45; Designation of bearing:ES209G2T04; Z:63.4 mm; e:22 mm; A1:16 mm; d1:62 mm;

T max.:100 °C; Weight:0.4 kg; e:15 mm; J:76.5 mm; A2:31 mm; G:M6x1; Recommended tightening torque for set screw:3.5 Nm; H:99 mm; A1:11 mm; S:6 mm;

C0:23.2 kN; L1:65 mm; d:50 mm; H:110 mm; T min.:-20 °C; Z:90 mm; H1:22 mm; S:24.6 mm; N:20mm; Designation of housing:PH210N-;

J:95 mm; N1:19 mm; B:34 mm; C0:6.65 kN; T max.:200 °C; L:127 mm; A1:22 mm; H1:15 mm; C:12.8 kN; S:17 mm;

S:12.7 mm; s1:15.5 mm; T max.:100 °C; e:15 mm; N:12mm; Designation of housing:F204-; Recommended tightening torque for set screw:3.7 Nm; C:12.8 kN; L:86 mm; B:31 mm;

Recommended tightening torque for set screw:8 Nm; L:117 mm; Designation of housing:F207-; A:34 mm; d:31.75 mm; e:19 mm; J:92 mm; S:17.5 mm; T min.:-20 °C; T max.:100 °C;

J:184 mm; A:45.8 mm; L:134 mm; S:22.2 mm; A2:61.4 mm; C0:29.2 kN; A1:15 mm; Recommended tightening torque for set screw:16.8 Nm; e:28 mm; s1:27.8 mm;

rs min:1.5 mm; Da max:117 mm; Fatigue limit load, Cu:2 kN; da min:78 mm; Nlim (grease):5,100 rpm; f0:14.5; Static load, C0:44 kN; D:125 mm; Dynamic load, C:62 kN; Min operating temperature, Tmin:-20 °C;

Da max:24 mm; Characteristic rolling element frequency, BSF:3.47 Hz; Max operating temperature, Tmax:110 °C; Min operating temperature, Tmin:-25 °C; rs min:0.3 mm; Radial clearance class:C3; d:10 mm; Fatigue limit load, Cu:0.09 kN; B:8 mm; Dynamic load, C:4.55 kN;