Cylindrical Roller Bearings

Contact Now

Cylindrical roller bearings are available in a wide range of designs, series, variants and sizes. The main design differences are the number of roller rows and the inner/outer ring flanges as well as cage designs and materials.

The bearings can meet the challenges of applications faced with heavy radial loads and high speeds. Accommodating axial displacement (except for bearings with flanges on both the inner and outer rings), they offer high stiffness, low friction and long service life. 

Cylindrical roller bearings are also available in sealed or split designs. In sealed bearings, the rollers are protected from contaminants, water and dust, while providing lubricant retention and contaminant exclusion. This provides lower friction and longer service life. Split bearings are intended primarily for bearing arrangements which are difficult to access, such as crank shafts, where they simplify maintenance and replacements. 

300,000 mm x 420,000 mm x 300,000 mm NTN 4R6030 cylindrical roller bearings

42300 N 41500 N
Two Seals 4500 rpm

280 mm x 420 mm x 190 mm NSK NNCF5056V cylindrical roller bearings

5000 rpm 80.0000 mm
18000 N 24700 N

Toyana NJ410 cylindrical roller bearings

537 mm 19000 kN
273 kN 2

220 mm x 400 mm x 108 mm NACHI NJ 2244 cylindrical roller bearings

3100 rpm 225000 N
265.0000 mm 3.00 mm

60 mm x 110 mm x 28 mm KOYO NJ2212R cylindrical roller bearings

64000 N 5300 rpm
4000 rpm 44.40 mm

ISO BK1716 cylindrical roller bearings

11000 r/min 35 mm
20 mm 0.056 kg

380 mm x 620 mm x 194 mm SKF C3176MB cylindrical roller bearings

4800 rpm 3200 rpm
Shield & Seal 130.0000 mm

130 mm x 340 mm x 78 mm NACHI N 426 cylindrical roller bearings

270 mm 1040 kN
80 mm 1.9 kg

170 mm x 260 mm x 122 mm NSK RS-5034 cylindrical roller bearings

193 kN 69.85 mm
142.875 mm 61.913 mm

300 mm x 420 mm x 118 mm NSK NNCF4960V cylindrical roller bearings

285.75 mm 15.875 mm
EPR 8 157.559 mm