Cylindrical Roller Bearings

Contact Now

Cylindrical roller bearings are available in a wide range of designs, series, variants and sizes. The main design differences are the number of roller rows and the inner/outer ring flanges as well as cage designs and materials.

The bearings can meet the challenges of applications faced with heavy radial loads and high speeds. Accommodating axial displacement (except for bearings with flanges on both the inner and outer rings), they offer high stiffness, low friction and long service life. 

Cylindrical roller bearings are also available in sealed or split designs. In sealed bearings, the rollers are protected from contaminants, water and dust, while providing lubricant retention and contaminant exclusion. This provides lower friction and longer service life. Split bearings are intended primarily for bearing arrangements which are difficult to access, such as crank shafts, where they simplify maintenance and replacements. 

480 mm x 700 mm x 165 mm ISO NUP3096 cylindrical roller bearings

63700 N 40500 N
6600 rpm 1.00 mm

140 mm x 190 mm x 37 mm NSK NN3928MB cylindrical roller bearings

40 kN 58.737 mm
71.2 kN 23024 CCK/W33

90 mm x 190 mm x 43 mm KOYO NUP318 cylindrical roller bearings

150 mm 125 mm
121 mm 430 kN

120,000 mm x 215,000 mm x 40,000 mm SNR NJ224EG15 cylindrical roller bearings

45000 N 130.0000 mm
6000 rpm 3000 rpm

95 mm x 200 mm x 45 mm NKE NU319-E-MPA cylindrical roller bearings

2600 rpm 49.20 mm
110000 N 2.00 mm

150 mm x 320 mm x 108 mm NACHI NUP 2330 cylindrical roller bearings

1.00 mm 8500 rpm
33.30 mm 41600 N

Toyana NF28/630 cylindrical roller bearings

76.00 mm 110.000 mm
182000 N 1.00 mm

500 mm x 920 mm x 336 mm NACHI 232/500EK cylindrical roller bearings

1.3750 in 204000 N
2100 rpm 140000 N

100 mm x 215 mm x 73 mm NKE NUP2320-E-MA6 cylindrical roller bearings

3000 rpm 8000 rpm
42.2 mm 1.50 mm

NSK 140RNP2401 cylindrical roller bearings

6000 rpm 7000 rpm
4000 rpm 29.00 mm

70 mm x 180 mm x 42 mm FAG NJ414-M1 + HJ414 cylindrical roller bearings

720 mm 6 mm
300 min-1 500 mm
2/21